Zaku 2 Black Tri Star Review Mg 10
Action Base (アクションベース , Akushon Bēsu ? ) is a line of plastic brandish stands for Gunpla and other model kits by Bandai. Kickoff introduced in 2006, an Activeness Base allows Gunpla kits to exist displayed in aerial poses. Each Action Base comes with an arm that can be adjusted in height and angle, equally well as dissimilar adapters for older Gunpla kits that exercise non accept peg holes available. The bases are modular allowing each to connect to other Activity Bases for displaying multiple model kits.
Activeness Base of operations 1
MG RX-78-2 Gundam (Ver. iii.0) (sold separately) displayed on an Action Base 1 (Articulate)
The beginning iteration of the action base, hence the number, the Action Base ane (AB1) is primarily designed for utilise with i/100 calibration Gunpla (e.1000. Primary Grades, Reborn-One Hundred); though it can likewise adapt ane/144 and SD Gunpla. The standard blueprint is a single octagon base with a small detachable foursquare.
The AB1 saw a redesign in 2015, distinguished from the regular Action Base of operations with the runner designation BA-thirteen. The circular slots in the base are arranged symmetrically and no screws are needed in the assembly. However, this particular has only been a kit inclusion, i.due east. non yet released every bit a separate item.
The AB1 is besides recommended for some 1/sixty kits as a support for weapons or accessories that would be as well heavy for the MS to carry by itself. In a few cases, 1 is included in the kit's release, similar with the PG MBF-P02Kai Gundam Astray Carmine Frame Kai (regular AB1) to support the Tactical Arms IIL and the PG GN-0000GNHW/7SG 00 Gundam Seven Sword/G (BA13) to support the Buster Rifle/Buster Sword.
| Packaging | Model | SRP (¥) | Release Date |
|---|---|---|---|
 | Action Base of operations Black i | ¥550 | 2006 November |
 | Action Base 1 Grayness | ¥550 | 2007 February |
 | Action Base ane White | ¥550 | 2007 February |
 | Action Base i White | ¥550 | 2007 October |
| Packaging | Model | SRP (¥) | Release Date | Sectional in |
|---|---|---|---|---|
 | Action Base 1 Blue | ¥594 | 2017 Baronial | Gundam Base of operations Tokyo |
 | Activeness Base 1 Blue | north/a | 2017 | Raffle prize for Gundam Base Tokyo Membership Card holders with 100 points |
Italicized items are exclusives.
| Kit | Action Base 1 included |
|---|---|
| MG ZGMF-X20A Strike Freedom Gundam (Full Burst Way) | Action Base one (Metallic Bluish) |
| 1/100 GN-0000+GNR-010 00 Raiser | Action Base 1 Celestial Being Ver. (Sparkle Green) |
| DRAGOON Germination Base for Gundam Off-target Blue Frame D (Premium Bandai) | Action Base 1 Black |
| WD-M01 ∀ Gundam (Moonlight Butterfly Ver.) (Premium Bandai) | Activeness Base 1 Clear |
| Expansion Result Unit of measurement "Moonlight Butterfly" for ∀ Gundam (Premium Bandai) | Action Base 1 Clear |
| PG RX-0 Unicorn Gundam (Last Battle Ver.) (Premium Bandai) | Action Base 1 Articulate (for employ with the Shield Funnels) |
| PG MBF-P02Kai Gundam Astray Scarlet Frame Kai (Premium Bandai in Japan; Limited Edition Retail otherwise) | Action Base 1 Grey (for use with Tactical Arms IIL) |
Italicized items are exclusives.
| Kit | Action Base 1 included |
|---|---|
| MG XXXG-01Wfr Gundam Fenice Rinascita | BA-13 Activity Base 1 (Blackness) |
| Expansion Issue Unit "Wings of Low-cal" (Premium Bandai) for MG Victory Two Gundam "Ver.Ka" | BA-xiii Action Base of operations 1 (Pearl White) |
| Weapon & Armor Hanger (Premium Bandai) for MG Total Armor Gundam (Gundam Thunderbolt) Ver. Ka | BA-13 Action Base of operations 1 (Gray) |
| Dramatic Combination: MG x Figure-Rise Bust (Express Edition MG Freedom ii.0 + FigureRise Bust Kira Yamato set) | BA-13 Action Base of operations 1 (Black) |
| 1/100 ASW-G-08 Gundam Barbatos Lupus King (Limited edition First-run only) | BA-13 Activeness Base 1 (Pearl White) |
| 1/100 ASW-One thousand-01 Gundam Bael (Limited edition First-run only) | BA-13 Activity Base 1 (Pearl White) |
| MG ZGMF-X09A Justice Gundam | BA-13 Action Base 1 (Blackness) |
| MG FA-78 Full Armor Gundam [Gundam Thunderbolt] Concluding Session Ver. (Premium Bandai) | BA-13 Action Base 1 (Black) |
| MG MS-06R Zaku Two High Mobility Type "Psycho Zaku" (Gundam Thunderbolt) Last Session Ver. (Premium Bandai) | BA-13 Activity Base 1 (Black) |
| MG FF-X29A G-Parts (Hrududu) (Premium Bandai) | BA-13 Action Base of operations 1 (Black) |
| MG GN-001/hs-A01D Gundam Barrage Exia (Premium Bandai in Japan; Limited Edition Retail otherwise) | BA-13 Action Base one (Sparkle Green) |
| PG GN-0000GNHW/7SG 00 Gundam Seven Sword/G | BA-13 Action Base 1 (Articulate) |
| MG MBF-P02 Gundam Astray Red Dragon (Premium Bandai) | BA-xiii Action Base of operations 1 (Black) |
Action Base 2
The RG RX-78-ii (sold separately) displayed on an Action Base of operations two (Black)
The Action Base ii (AB2) is designed primarily for one/144 scale kits (e.thou. RGs and HGs), merely also works well for SD kits. For larger 1/144 kits, forth the lines of HGUC NZ-666 Kshatriya and HGUC MRX-009 Psyco Gundam, the AB1 is more suited.
The AB2 is also recommended occasionally for 1/100 calibration kits to support large weapons or accessories, similar in the case of the MG 00 Qan［T］ when using the Buster Sword or Buster Burglarize weapon configuration. In a few MG kits, like the Astray Cerise Frame Kai, an AB2 is included for supporting the Tactical Arms IIL.
The standard design of the Activeness Base 2 is composed of ii trapezoid bases each with a circular slot for the arm. These can be connected in a hexagonal or parallelogram configuration. Multiple AB2s tin can be connected in varied configurations. Each single packaging provides ii base connector parts, which can be stored in a slot on the underside of the base of operations when non in apply.
Since the circular slots for Action Base 1 and two are the same size, the back up arm of the AB2 is compatible with the base of AB1.
Adapter parts included are peg-type, two fork-type (1 narrow, one wide), spiral-on platform-type, and narrow slit-type. RG and HGGTO kits come with their own specific adapters.
| Packaging | Model | SRP (¥) | Release Date | Sectional in |
|---|---|---|---|---|
 | Action Base 2 Blue GBT | ¥486 | 2017 August | Gundam Base of operations Tokyo |
Italicized items are exclusives.
| Kit | Activity Base ii included |
|---|---|
| MG MBF-P03R Gundam Astray Blue Frame Second Revise | Action Base ii (same shade of bluish as the frame of the kit) |
| MG MBF-P02Kai Gundam Astray Red Frame Kai | Action Base 2 (same shade of blood-red as the frame of the kit) |
| MG GNT-0000 00 Qan［T］ | Action Base of operations 2 (black) |
| HGUC PMX-000 Messala | Action Base ii arm with different base |
| MG MBF-02VV Gundam Astray Plow Ruby-red (Premium Bandai in Japan; Limited Edition Retail otherwise) | Action Base two (white) |
| MG GNT-0000 00 Qan［T］(Trans-Am Mode) (Special Blanket) (Premium Bandai in Japan; Limited Edition Retail otherwise) | Activeness Base two (black) |
| RG Destiny Gundam Effect Unit Wing of Calorie-free (Premium Bandai) | Action Base of operations 2 (smoke black clear) |
Activeness Base of operations three
Image Image of AB3 displaying the HGGB GPB-X80 Beginning Gundam (sold separately) with Bandai Hobby Center photo (not included)
Similar the AB2, the Action Base 3 (AB3) is primarily designed for 1/144 Gunpla kits. It features a rectangular base with circular arm slots that are the same size as those in AB1, i.e. AB1 and AB2 arms are compatible with this base. These are positioned in each corner and the middle of each side. The heart of the rectangular base also has ix of these round slots arranged in a iii x 3 configuration.
The center of the base features a slot for a postcard-sized logo card. The builder can employ any postcard-sized photograph of their preference. If used in this manner, the nine slots in the center will be covered.
Each regular packaging of the AB3 comes with a dedicated arm, a sample Gunpla logo card, a PET clear cover for the menu slot, ii connector parts, 3 fork-type adapters, one peg-type adapter, two screws, and 2 hex nuts. Extension parts are also provided for displaying the base at an bending, which can be stored on the underside of the base of operations when not in use.
| Packaging | Model | SRP (¥) | Release Date |
|---|---|---|---|
 | Activity Base iii Black | ¥650 | 2011 March |
Italicized items are exclusives.
| Kit | Action Base three included |
|---|---|
| HG00 CB-001.v 1.5 Gundam Blazon Dark + Special Activeness Base (Chara Hobby 2010) | AB3 with bluish base and white arm |
| HG00 GN-0000GNHW/7SG 00 Gundam Seven Sword/G Inspection Color + Special Action Base (Chara Hobby 2010) | AB3 with red base and black arm |
| HGGB GPB-X80-30F Beginning 30 Gundam GPB J Color Clear IFS Ver. + Action Base iii Red (Chara Hobby 2011) | AB3 with red base of operations and blackness arm |
| HGGB GPB-X78-30 Forever Gundam GPB D Color Clear Saki Mishima Ver. + Action Base of operations 3 Blueish (Chara Hobby 2011) | AB3 with blue base and white arm |
| XXXG-00W0 Wing Gundam Nix EW Expansion Effect Unit "Seraphim Plume" (Premium Bandai) | AB3 with translucent black base of operations; includes curved arms (specifically designed for displaying the "Seraphim Feathers") and ii photograph bill of fare options |
Activeness Base of operations four
Sample usage of AB4 (with an additional base of operations) displaying multiple Gunpla (sold separately): MG Liberty 2.0, RG Unicorn, HGUC RX-78-2 (Revive)
The Action Base iv (AB4) improves upon the AB1's design making it a highly versatile display accessory. The AB4 is able to conform 1/100, 1/144 calibration, and SD Gunpla kits, as well every bit character figures, such as Bandai's own South.H. Figuarts line.
Each AB4 packaging includes three hexagonal bases, three connector parts for these bases, two standard back up arms, various articulation parts, and multiple adapters: three fork-blazon, two peg-type, and one pincer-type. The standard back up arms tin be used individually (for displaying two kits) or connected together (for more height or position options). There is also a thinner back up arm ideal for displaying weapons and accessories, such every bit "attack drones" (e.g. funnels, bits). The various joint parts tin can be used to attach support arms that were included in previously released kits.
| Packaging | Model | SRP (¥) | Release Date |
|---|---|---|---|
 | Activity Base 4 Black | ¥648 | 2017 December |
 | Action Base iv Clear | ¥648 | 2017 Dec |
| Packaging | Model | SRP (¥) | Release Appointment | Exclusive in |
|---|---|---|---|---|
 | Action Base 4 (Tricolor Colour) | ¥756 | 2018 July 7 | Gundam Base Tokyo |
 | Action Base of operations 4 Char Aznable'south Colors | ¥756 | 2019 July twenty | Gundam Base of operations Tokyo |
Italicized items are exclusives.
| Kit | Action Base of operations 4 included |
|---|---|
| MG MBF-P02 Gundam Astray Ruby-red Dragon (Premium Bandai) | No hexagonal base of operations; only the AB4 support arms in clear color |
Action Base of operations v
Sample usage of AB5 displaying multiple Gunpla (sold separately): RG Sinanju & RG Unicorn
The Action Base five (AB5) improves upon the AB2'due south blueprint adding versatility. The AB5 is able to arrange regular-sized 1/144 scale, and SD Gunpla kits, besides as similar sized collectibles.
Each AB5 packaging includes i hexagonal base (the aforementioned as those included in AB4), one connector parts for connecting this base of operations to AB4 and other AB5 bases, two standard back up arms, various joint parts, and multiple adapters: two fork-type, two peg-type, and one pincer-type. The standard support arms can be used individually (for displaying two kits) or connected together (for more height or position options). There is also a thinner support arm ideal for displaying weapons and accessories, such as "assail drones" (e.g. funnels, bits). The various joint parts tin be used to attach support arms that were included in previously released kits.
The included AB5 parts are identical to those found in the AB4 making them uniform with each other.
| Packaging | Model | SRP (¥) | Release Date |
|---|---|---|---|
 | Activeness Base 4 Black | ¥540 | 2017 December |
 | Activity Base of operations 5 Clear | ¥540 | 2017 December |
| Packaging | Model | SRP (¥) | Release Date | Sectional in |
|---|---|---|---|---|
 | Action Base 5 Unicorn Colour | ¥648 | 2018 July 7 | Gundam Base Tokyo |
 | Action Base 5 E.F.S.F. Image Colors | ¥648 | 2019 June | Gundam Base Tokyo |
 | Action Base 5 Zeon Image Colors | ¥648 | 2019 June | Gundam Base Tokyo |
Italicized items are exclusives.
| Kit | Action Base 5 included |
|---|---|
| HGUC RX-0 Unicorn Gundam (Luminous Crystal Body) (Gundam Base Tokyo & Gundam Base Online Shop) | AB5 Space Color variant |
| HGBD GN-0000DVR/Due south Gundam 00 Heaven (Higher Than Sky Phase) (Special Edition) | AB5 Articulate Orangish |
| HGUC AMS-123X-Ten Moon Gundam | AB5 Clear Black |
| MG GNT-0000/FS 00 Qan［T］ Full Saber | AB5 Articulate |
| HGMZ Mazinger Z (INFINITY Ver.) | Black Base of operations with Clear arms and connector parts |
| HGMZ Great Mazinger (INFINITY Ver.) | Blackness Base with Articulate arms and connector parts |
Activity Base Mini
Sample usage displaying the SDEX Off-target Cherry-red Frame (sold separately)
The Activeness Base Mini (AB Mini) is primarily designed for SD kits merely tin also arrange smaller to regular size 1/144 Gunpla.
Each packaging of AB Mini comes with 2 units, each consisting of a V-shaped base and a support arm. Compared to other Activity Base of operations iterations, the AB Mini provides only minimal options for connection and display height/angles and may not be stable enough for heavier kits. Still, information technology is elementary (assembled in only a few steps) and economical (SRP ¥420 a pair).
The V-shaped base has 5 peg holes for attaching the support arm. Each AB Mini tin can be connected to each other only are not compatible with platforms of other Activity Bases.
| Packaging | Model | SRP (¥) | Release Appointment |
|---|---|---|---|
 | Action Base of operations Mini | ¥420 | 2016 February |
Lightning Base
Sample usage of the Lightning Base with an HG RX-78-2 Gundam (Ver. G30th)
Lightning Base Plate Type (ライトニングベースプレートタイプ , Raitoningu Bēsu Purēto Taipu ? ) (LB) is a line of illuminating bases designed for 1/100 and 1/144 Gunpla kits. It has a black octagonal base, with two LEDs on contrary sides as the light source, while a articulate textured plate diffuses the light. The light direction may exist adjusted by rotating the plate. This base of operations requires three AAA batteries (not included) as power source.
LBs do non accept a support arm, so by itself, it tin only be used for ground poses. However, the base characteristic a modular pattern and connector parts. These let the base to connect with other LBs, too as an AB1 to enable illumination of kits in aeriform poses.
| Packaging | Model | SRP (¥) | Release Date |
|---|---|---|---|
 | Lightning Base Plate Red | ¥i,200 | 2009 December |
 | Lightning Base Plate Dark-green | ¥1,200 | 2009 Dec |
 | Lightning Base Plate Blue | ¥1,200 | 2009 December |
Chara Stand up Plate
Sample image of CSP 01 Mikazuki Augus (depicted in the packaging) used to diplay the HGIBO Gundam Barbatos (sold separately)
Chara Stand Plate (キャラスタンドプレート , Kyara Sutando Purēto ? ) (CSP) is a line of display stands with a base depicting a character from the Gundam franchise. So far, just characters from Mobile Suit Gundam IRON-BLOODED ORPHANS and one from Gundam Build Fighters Try have been featured in CSP releases.
Each CSP consists of a hexagonal base plate and a back up arm. The base has three layers: the character analogy, the main black base of operations that besides serves as the outline for the illustration, and a clear encompass on the bottom to hold the analogy in place. When assembled, the character plate features a stained glass artful. A connector is provided to attach the base to other CSPs.
The support arm is relatively uncomplicated, featuring only a peg-blazon connection and only limited angle aligning options, alike to the AB Mini. When non used as an action base of operations and the support arm detached, the CSP can be a standalone tabletop brandish or hung on a wall.
| Packaging | Model | Series | SRP (¥) | Release Date |
|---|---|---|---|---|
 | Mikazuki Augus | Mobile Adapt Gundam IRON-BLOODED ORPHANS | ¥500 | 2015 December |
 | Orga Itsuka | Mobile Suit Gundam Atomic number 26-BLOODED ORPHANS | ¥500 | 2015 December |
 | Gaelio Bauduin | Mobile Arrange Gundam Fe-BLOODED ORPHANS | ¥500 | 2016 January |
 | McGillis Fareed | Mobile Arrange Gundam Iron-BLOODED ORPHANS | ¥500 | 2016 February |
 | Kudelia Aina Bernstein | Mobile Suit Gundam IRON-BLOODED ORPHANS | ¥500 | 2016 April |
 | Atra Mixta | Mobile Suit Gundam Atomic number 26-BLOODED ORPHANS | ¥500 | 2016 May |
 | Fumina Hoshino | Gundam Build Fighters Try | ¥500 | 2016 September |
HGBC Bases
Primary Article: High Grade Build Custom
Ii display bases were released under the High Grade Build Custom (HGBC) product line. The bases were primarily marketed for kits under the Loftier Form Build Fighters (HGBF) and High Grade Build Defined (HGBD) lineups, just volition also adjust other 1/144 and SD kits.
| HGBC No. | Packaging | Model | SRP (¥) | Release Date | Description |
|---|---|---|---|---|---|
| 00 |  | HGBC Build Custom GP Base of operations | ¥600 | 2013 November | 1:1 calibration replica of the device used past characters within the Gundam Build Fighters serial. Features a card slot meant to indicate information about its corresponding Gunpla. |
| 34 |  | HGBC Diver Gear | ¥700 | 2018 April | 1:1 scale replica of the device used by characters within the Gundam Build Divers serial. Features a specifically shaped card slot meant to bespeak information about its corresponding Gunpla. Uses back up arm and connector parts from AB5. |
Unreleased
A Sand-colored Activeness Base of operations 2 is offset revealed at a convention simply left unreleased.
Tips & Tricks
- Many of later kit releases, specially higher grades, include an activity base adapter. In most cases, this is the best choice for mounting the kit to a respective action base.
- In example in that location are no adapters included, the instruction manual commonly recommends the optimal adapter part. In that location are rare occasions when a different adapter might piece of work better, and so trial-and-error may exist needed on the builder'due south role.
- Many kits were released before the the existence of official action bases, hence their teaching manual does not include the said recommendations. Builders tin check the recommendations on the action base packaging itself, though trial-and-error may still be needed.
- Colorless clear action bases are pretty useful when taking photos of kits on a white background as the base becomes nearly invisible. Same is true for black/dark gray action bases on a black background.
See Also
- Collection Stage
- System Base
Source: https://gunpla.fandom.com/wiki/Action_Base
0 Response to "Zaku 2 Black Tri Star Review Mg 10"
Post a Comment